9.52mm Diameter Refrigeration Evaporator Coil

Shandong Gold Fly Heat Exchange Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of 9.52mm diameter refrigeration evaporator coil in China. With abundant experience, we warmly welcome you to wholesale bulk advanced 9.52mm diameter refrigeration evaporator coil for sale here from our factory. Customized orders are welcome.

9.52mm diameter refrigeration evaporator coil

1.product Introduction

The product adopts a universal standard 9.52mm pipe diameter design. Compared with a narrow pipe diameter evaporator, the pipeline diameter is moderate, the refrigerant flow resistance is small, and the system oil return is smooth, effectively avoiding problems such as oil accumulation, ice blockage, and heat transfer attenuation in the pipeline. It can be adapted to long-term full load operation of the machine. The 8-row multi-layer tube row structure greatly extends the cold and hot exchange stroke, and the air flows through the fins and pipelines to fully exchange heat, greatly improving the heat exchange utilization rate. The cooling efficiency far exceeds that of conventional 4-row and 6-row evaporators, which can quickly lower the internal temperature of the equipment and accurately maintain a low-temperature and constant temperature environment. Paired with high-quality hydrophilic anti-corrosion aluminum fins, the surface coating is uniform, the frosting is smooth and even, the defrosting drainage is fast and does not accumulate water, and it is not easy to accumulate dust or mold, effectively avoiding fin blockage. The long-term use of heat transfer performance is stable, greatly reducing equipment maintenance frequency.

2.product Parameter (specification)

3.Product feature and application

Large cooling capacity and fast cooling speed
The 8-row multi-layer heat exchange structure significantly extends the heat exchange stroke, allowing for more complete heat exchange between air and refrigerant. Compared to ordinary 4-6 row evaporators, it has higher refrigeration efficiency, fast low-temperature pulling, and good constant temperature effect, making it suitable for quick freezing and low-temperature preservation equipment.
Reasonable diameter and more stable operation
9.52mm standard large pipe diameter, smooth refrigerant circulation, reduced system pressure, excellent oil return effect, less prone to oil accumulation and ice blockage, supports 24-hour continuous full load operation of the unit, and has an extremely low failure rate.
-Frost and corrosion resistance, long service life
Hydrophilic anti-corrosion fins prevent water accumulation, mold growth, dirt blockage, and oxidation. They have low heat transfer attenuation after long-term use and can be used stably under humid, low-temperature, and frequent defrosting conditions. Their durability far exceeds that of ordinary evaporators.
Suitable for high cooling capacity working conditions and strong universality
Compatible with mainstream refrigerants such as R22, R410A, R404A, R134a, suitable for medium and large commercial refrigeration, low-temperature quick freezing, industrial cooling equipment, with a wide range of adaptation scenarios and universal maintenance parts.
Lower overall energy consumption and high cost-effectiveness
High heat exchange efficiency, low heat loss, reduced compressor workload, faster cooling of the unit, fewer starts and stops, more energy-efficient long-term operation, and lower overall equipment usage costs.

Widely applicable to low-temperature quick freezing cold storage units, large quick freezing cabinets, commercial supermarket air curtain cabinets, fresh-keeping cold chain cabinets, industrial chillers, large ice makers, constant temperature and humidity units, commercial low-temperature refrigeration equipment, and various medium to large capacity refrigeration systems.

4.Prodection details

5.Deliver,shipping and serving

1, Delivery
Production and delivery
Automated electrophoresis assembly line for mass production, with regular specifications available in stock; Customized sizes and integrated electrophoretic models with shells are delivered on time according to the order cycle. After production is completed, full inspection of air pressure leak detection and paint appearance is carried out to prevent defective products such as welding leaks and paint peeling from being shipped out.
Shipment Inspection
Each product is checked for model, size, and electrophoretic paint integrity, with a specification list attached. Foreign trade orders can be accompanied by packing lists and certificates of conformity to meet export customs declaration requirements.
Delivery method
Support factory self pickup, whole vehicle delivery, less than truckload logistics, and full container shipment. We can cooperate with customer designated freight forwarders to arrange container loading.
2, Transportation
protective packaging
The outer layer of the product is covered with protective film, and corner protectors are added. For large and multiple items, hard cardboard boxes/wooden frames are used for reinforcement; Electrophoretic paint surface is scratch resistant, anti-collision, and avoids transportation wear, exposure, and rusting.

The product quality is stable, and non-human damage is covered by warranty. Factory-produced products are free from natural leakage, process defects, and other quality issues. In case of quality problems, we support replacement, repair, and technical support. We provide lifetime technical consultation, installation guidance, and troubleshooting services, ensuring rapid response to customer inquiries. We address equipment compatibility, usage debugging, and other challenges, allowing customers to purchase with confidence and use without worry.The product quality is stable, and non-human damage is covered by warranty. Factory-produced products are free from natural leakage, process defects, and other quality issues. In case of quality problems, we support replacement, repair, and technical support. We provide lifetime technical consultation, installation guidance, and troubleshooting services, ensuring rapid response to customer inquiries. We address equipment compatibility, usage debugging, and other challenges, allowing customers to purchase with confidence and use without worry.

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

6.FAQ

Q1：Are you a factory or a trading company?
A1: We have our own production factory and sales company, self-produced and sold..

Q2: Where is your factory located?
A2: Our factory is located in Xingfu Town, Binzhou City, Shandong Province.Always welcome all
customers to visit and guide

Q3: Is a sample available?
A3：Yes.

Q4: Can you quote according to the drawing?
A4: Yes,we can.

Q5. What is your advantage?
A5. 1. Rich production experience since 1999.
2. A variety of machinery and equipment processing,
stable quality while ensuring delivery.
3. Minimum order quantity:1 PCS.
4. Large-scale production makes our lower prices for
products of the same quality
5. Samples and customized services are available.

Q6.What material are you using
A6.We customize and select materials such as aluminum tubes and copper tubes according to customer needs

Q7.Is it easy and convenient to use and operate
A7.Yes, it's very simple

Q8.Is the product packaging secure or not?
A8.Yes, we will package it very safely and securely

7.Latest news

Shandong GoldFly Heat Exchange Equipment Co., Ltd

PROFESSIONAL CONDENSER & EVAPORATOR COIL MANUFACTURER :
Our workshop covers an area of 20,000 square meters with many first-class professional equipment and technical engineers.
We have been committed to the scientific research, production and sales of condensers and evaporators as a comprehensive supplier since 1999.
The condensers and evaporators produced are of single-air, double-air, and triple-air models. Thanks to our own R&D and production team,
Focus on Production and R&D in Condensers,Evaporators,Unit,Monoblock.

WE MADE PRODUCTS WITH RIGOROUS IN CRAFTMANSHIP AND MATERIALS:
1. Choose light foil, hydrophilic foil aluminum fins ,copper tubes And other high-quality raw materials
2.Mechanical tube expansion, secondary flanging and other optimized process.Machine welding speeds up production efficiency while guaranteeing extremely high quality.
3. Pipe spacing and sheet spacing is designed by engineers rigorously , and the shell and end plates are stamped from high-quality plates,durable and heavy duty.
4. Strict chemical anti-corrosion treatment at the end,100% quality inspection before leaving the factory

Features of our condensers and evaporators:
compact structure, efficient heat transfer, anti-ultraviolet, and good anti-corrosion performance

Hot Tags: 9.52mm diameter refrigeration evaporator coil, China 9.52mm diameter refrigeration evaporator coil manufacturers, suppliers, factory, evaporator for component integration, evaporator for rubber processing plants, evaporator for social media marketing, evaporator for solid handling, evaporator importer, single effect evaporator