Shandong Gold Fly Heat Exchange Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of new evaporator coil in China. With abundant experience, we warmly welcome you to wholesale bulk advanced new evaporator coil for sale here from our factory. Customized orders are welcome.
Products Details
|
Tube Size |
Tube Material |
Fins Spacing |
End Plate Material |
|
·3/11"(7.00mm) |
Copper |
1.8mm |
Galvanized Sheet |
|
·3/8"(9.52mm) |
Carbon Steel |
2.0mm |
Aluminum |
|
·1/2"(12.00mm) |
Aluminum |
3.0mm |
Stainless Steel |
|
·5/8"(15.88mm) |
>3.0mm |
The evaporator is a heat exchange device. After throttling, the low-temperature and low-pressure refrigerant liquid evaporates (boils) into vapor, absorbs the heat of the material to be cooled, reduces the temperature of the material, and achieves the purpose of freezing and refrigerating food. In the air conditioner, the surrounding air is cooled to achieve the effect of cooling and dehumidifying the air. The lower the evaporation temperature of the refrigerant in the evaporator, the lower the temperature of the object to be cooled. In the refrigerator, the evaporation temperature of the general refrigerant is adjusted at -26°C to -20°C, and in the air conditioner, it is adjusted at 5°C to 8°C.
Usually, new evaporator coil are used on various equipment that requires cooling or heating, such as freezers, ice maker,supermarket display cabinets,cold room, containers, cars, ships, etc. The copper tube aluminum fins evaporator we produced can withstand an internal pressure of up to 6.5Mpa, making it perfectly suitable for refrigeration equipment in various commercial high-pressure environments.
The internal medium can be various refrigerants such as R290,R134A,R404A,R600A or other solutions such as water. In addition to ensuring that the seal does not leak, it is also necessary to expand the copper tube to tightly bond with the aluminum fins to achieve maximum heat transfer efficiency. All of these steps must be carried out using various professional production equipment and personnel.
The usage process of the new evaporator coil is equally important, and the frosting condition of the evaporator should be checked regularly. When the frost layer is too thick, it should be defrosted in a timely manner. When there is abnormal frosting, it may be caused by blockage, and the cause should be promptly identified and eliminated.
Hot Tags: new evaporator coil, China new evaporator coil manufacturers, suppliers, factory, Copper Tube Freezer Evaporator, Refrigeration Unit For Supermarket Island Cabinets, gas heat exchanger, Condenser Unit for Refrigerator, Small Walk In Cooler, Monoblock Uint